GCSMSB

BACnet IP SMS alarm module

GCSMSB is a BTL listed standalone BACnet B-AAC class programmable “all in one” Alarm TXT messaging and fully functioning expandable controller.

Description

GCSMSB is a BTL listed standalone BACnet B-AAC class programmable “all in one” Alarm TXT messaging and fully functioning expandable controller. Alarms can be programmed within the controller or receive Alarms from other controllers on the network then send the message to a maximum of 10 preset cellular phones. Remote TXT control is also possible with a return TXT notification of recipt of TXT command. Expansion is possible by using upto 24 x EIM expansion modules.
Conforms to international BACnet Ethernet/IP communication protocol and fully compatible with any BACnet system.

Features

  • BTL listed BACnet Advanced Application Controller (B-AAC) class device.
  • 10/100M Ethernet interface can be either BACnet Ethernet or the BACnet/IP communication protocol, Peer to Peer function – read/write to other DDC’s objects, can issue a read (DS-RP-A/DS-RPM-A) and write (DS-WP-A) BACnet object properties function.
  • EIMnet communication interface can connect up to 24 x EIM I/O expansion modules.
  • RS-232 communication interface to GSM module connection by AT command.
  • PIN code input mode available for SIM card.
  • Dual system of GSM 900/1800MHZ, applicable for most regions.
  • Support brief message up to 60 English characters (contains alarm time and status).
  • GSM module can be remotely located by RS232 cable to allow for better mounting location.
  • 2 Calendars, 12 Schedules, 4 Notification Class, 40 Event Enrollments standard BACnet objects. Read or write 20 external devices with maximum 100 points.
  • Automatically sends BACnet notification messages up to 10 present cellular phones. The message can be sent in a preset timezone and send to a specific person according to the notifications number.
  • 1 configure port for device settign and debug AT command.
  • 150 AV and 150 BV points, there are 20 message command, these commands help setting or inquirey data. 10 phone numbers, 10 notification number ofr differerent receivers. 1 PPIN code setting, 1 message setting code, 1 language selection. Quality of signal, error code, error message, total messages in the waiting list.

View more detailed specifications (PDF). View PDF